1
/
von
6
ShoptAI
8 CH Channel DSMX Spectrum AR8000 Receiver 2.4 GHZ W Satellite Fit Specktrum DX8 DX7s DX6 DX6i DSM2 JR DSX7 DSX6 Transmitter RC Airplane
8 CH Channel DSMX Spectrum AR8000 Receiver 2.4 GHZ W Satellite Fit Specktrum DX8 DX7s DX6 DX6i DSM2 JR DSX7 DSX6 Transmitter RC Airplane
Normaler Preis
$35.70 USD
Normaler Preis
$27.77 USD
Verkaufspreis
$35.70 USD
Versand wird beim Checkout berechnet
Anzahl
Verfügbarkeit für Abholungen konnte nicht geladen werden
Spectrum DSMX AR8000 8CH Receiver 2.4G with Satellite for DX6i DX7s DX8 Transmitter RC Airplane Helicopter JR DSX6 DSX7 DSM2
8 CH Channel DSMX AR8000 Receiver 2.4 GHZ W Satellite Fit Specktrum DX8 DX7s DX6 DX6i DSM2 JR DSX7 DSX6 Transmitter RC Airplane
AR8000 DSMX high-speed 8-channel receiver
Channels: 8
Modulation: DSM2 /DSMX
Band: 2.4GHz
Size: 1.35 in (34.3mm)*1.27 in (32.3mm)*0.45 in (11.4mm)
Weight: 0.33 oz (9.4 g)
Voltage Range:3.5–9.6
Channels: 8
Modulation: DSM2 /DSMX
Band: 2.4GHz
Size: 1.35 in (34.3mm)*1.27 in (32.3mm)*0.45 in (11.4mm)
Weight: 0.33 oz (9.4 g)
Voltage Range:3.5–9.6
The frequency method:
1. Insert the frequency plug into the receiver BIND channel, the battery (or turn on the power supply) into any other unused channel, then the internal receiver and external receiver LED lights flashing state.
2. Transmitter set the status of each channel (for the protection of the state when out of control, in general, the lowest throttle), hold down the remote control on the code key (lights), and open the transmitter power, (preset all-channel protection Set here)
3. At this point the internal receiver LED lights from fast flash to slow flash, within a few seconds the receiver and external receiver LED lights to light, LED light is always on when the frequency to complete
4. Remove the BIND interface on the code line, re-power the normal operation of the channel.
1. Insert the frequency plug into the receiver BIND channel, the battery (or turn on the power supply) into any other unused channel, then the internal receiver and external receiver LED lights flashing state.
2. Transmitter set the status of each channel (for the protection of the state when out of control, in general, the lowest throttle), hold down the remote control on the code key (lights), and open the transmitter power, (preset all-channel protection Set here)
3. At this point the internal receiver LED lights from fast flash to slow flash, within a few seconds the receiver and external receiver LED lights to light, LED light is always on when the frequency to complete
4. Remove the BIND interface on the code line, re-power the normal operation of the channel.
Package Content:
1 x AR8000 2.4G Receiver
1 x 2.4G Satellite
1 x Cable
1 x Bind Plug








Aktie
